Product Shipping Box

Free next day delivery

…on all Owatrol orders placed before 3pm, working days only

Choose OptionBuy online & Save!
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
Clear
Qty:

Owatrol Deco

From £20.39

Properties

  • Interior and exterior use.
  • Easy to use.
  • Highly flexible gloss finish – Will not peel or flake.
  • Rust inhibiting primer and finish in one.
  • Adheres to all surfaces – plastic, wood, ferrous and non-ferrous metals.
  • Excellent resistance to weathering, moisture and pollution.
  • Available in a range of 13 colours.
  • Can be applied direct to rusted surfaces.
  • Withstands temperatures up to 175°C once fully cured.

Where to use

  • Ferrous and non-ferrous metals – galvanised, aluminium, zinc etc
  • Fencing, railings, garden furniture, porches, various metal structures etc
  • Doors, frames, radiators, pipes, machinery, tiles, expanded polystyrene etc
  • Plastic and wood surfaces.
  • Horizontal and vertical surfaces.

Surface Preparation

  • Surfaces must be clean, dry and free from oil, grease and other surface contaminants.
  • Remove all mill scale; loose and flaking rust and old paint back to a sound surface and edge.
  • Lightly rusted surfaces should be lightly wire brushed.
  • Feather in any sharp edges.
  • Surfaces exposed to chemicals (acids, alkalis or salt deposits) should be washed using copious amounts of water or steam cleaned.
  • Severely contaminated surfaces should be cleaned using an appropriate solvent.
  • Abrade new wood surfaces with 120 grit paper to open the woods pores and dust off. Wash with denatured alcohol (methylated spirits) to remove any sanding residue.
  • Oily, resinous and greasy woods should be thoroughly degreased with denatured alcohol (methylated spirits), acetone or similar solvent based product.

Application

Stir can well before and during use.
Do not thin.

Metal Surfaces

New surfaces excluding galvanised surfaces:
Apply 2 coats of Owatrol-Deco allowing drying time between coats

New galvanised surfaces:
Prime surface with Owatrol Oil and allow to dry 24 hours.
Apply 2 coats of Owatrol-Deco allowing drying time between coats.

Clean, lightly rusted or new unpainted rusty steel:
Apply 2 coats of Owatrol-Deco allowing drying time between coats.

Old severely rusted surfaces:
Apply wet on wet applications of Owatrol Oil until rust is fully saturated and allow to dry. Saturation is indicated by a uniform glossy appearance to the surface when Owatrol Oil is dry.
Apply 2 coats of Owatrol-Deco allowing drying time between coats.

Previously coated surfaces:
Spot prime all exposed metal with Owatrol Oil or Owatrol-Deco depending on severity of rust and allow to dry.
Continue applying Owatrol-Deco, allowing drying time between coats to bring level with existing finish.
Apply 2 coats of Owatrol-Deco over entire area; allowing drying time between coats.

Wooden Surfaces

New surfaces:
Apply 2 coats of Owatrol-Deco over entire area; allowing drying time between coats.

Damaged, soft, punky or porous wood surfaces:
Prime with Owatrol Oil and allow to dry.
Apply 2 coats of Owatrol-Deco over entire area; allowing drying time between coats.

Previously coated surfaces:
Spot prime all exposed surfaces with Owatrol Oil or Owatrol-Deco depending on condition and porosity of the wood, allow to dry.
Continue applying Owatrol-Deco, allowing drying time between coats to bring level with existing finish.
Apply 2 coats of Owatrol-Deco over entire area; allowing drying time between coats.

Other Surfaces (plastic, expanded polystyrene, tiles etc)

Apply 2 coats of Owatrol-Deco over entire area; allowing drying time between coats.
For previously coated surfaces spot prime any bare areas with Owatrol-Deco to bring level with existing finish. Finish with 2 coats of Owatrol-Deco to the entire area – allowing drying time between coats.

Useful Information

Coverage: 12-15m² per litre
Application Tools: Brush, Roller,  Airless Sprayer (0.4 mm x 80° @ 1860-2000 psi (128-138 bars))
Suitable for: Exterior & Interior use
Clean Up: White-spirit
Drying time: 6 hours
Re-coating Time
: 18-48 hours
Suitable Surfaces: All surfaces