Owatrol ATM 007 Moss Cleaner

Ready To Use Moss, Algae & Lichen Cleaner With Long-lasting Effect

ATM 007 moss cleaner can be used either as a preventative or as a curative treatment for surfaces which are already suffering with moss or lichen. It can be used on a wide range of surfaces including brick, stone, concrete, slate, tile, shingles, plaster, plastic and more.

Properties

• Preventative and curative.
• Long lasting protection.
• Concentrated formula – Highly economical.
• Easy application. Easy to use.
• Waterbased – Colourless and odourless.
• Excellent wetting action.
• Recommended before painting.
• Does not change the colour of the surface it’s applied to.

Where to use

• Exterior use.
• Façades, Roofs, Balconies, Paving, Steps, Terraces, Monuments, Pottery, Tennis Courts etc
• Stone, Brick, Slate, Shingles, Concrete, Fibre-cement, Coatings, Plastic etc

Surface Preparation

• Brush or scrape the surface to remove any debris, moss, lichen etc. that can easily be removed so that enough of the substrate is accessible.

Dilutions

Curative: 1 part ATM 007 to 9 parts water.
Preventative: 1 part ATM 007 + 19 parts water.

Application

Curative

• Apply diluted ATM 007 generously, ensuring moss and thick patches of lichen are well saturated.
  You then have 2 Options:
  1 – Wait 48 hours then rinse with a power washer (max. 50 bars at a minimum of 50 cm from the surface to prevent damage).
  2 – Do not rinse and allow bad weather to eliminate residue incrementally. The effects will be visible in 10 to 15 days.

Preventive

• Apply diluted ATM 007 generously to all surfaces to be treated.
• For best results use between April and December.
• Ensure it does not rain 12 hours prior to application and a minimum of 48 hours after the treatment.

Coverage

Curative

Undiluted: 5 m² per litre
Diluted: 50 m² per litre (125 m² per 2.5 litres of concentrated ATM 007 diluted)

Preventative

Undiluted: 5 m² per litre
Diluted: 50 m² per litre (250 m² per 2.5 litres of concentrated ATM 007 diluted).

Actual coverage is dependent on the condition of the surface, absorption into the substrate and application method.

Information

Application tools:  Brush, Roller, Pump Sprayer, Stainless steel spray gun.
Application temperature: Between 5°C and 35°C.
Clean-up: Water.